Can't get passed connecting...
by Soliduz | 15/05/2010 19:53:30![]() Bought a Mac a few months back, and installed and patched. Everything has gone smoothly and what not, until i try to log in. It gets stuck at "connecting" and it doesn't move from there. I've tried two diff routers, even a friends where he is actively playing right now, so there shouldn't be any port forwarding problems. Idk what else to try. Any help?? Thanks To Each, His Own |
by Radoslawn | 17/05/2010 14:20:29![]() Hello Soliduz, Try resetting PRAM instead. Reset PRAM: (Note: in order for this procedure to work the sound must be working normally and not muted) 1. (re)start the computer 2. right after the initial system chime press Opt+command (Apple)+p+r 3. hold these keys down until you get two more chimes 4. let go of the keys and let the system boot up naturally (do not press any keys) ( If sound is not an option: press the keys stated above right after the (re)start, and instead of listening for the 2 chimes, the screen will flash white 2 times.) Since you tried to connect via your friend's active connection, we need to concentrate on your Mac. Were you trying to connect using a wireless connection or wired ? No matter how simple the ??? seem, we were all nbs at one time. Grab your free Apple mount here !!! (okay I lied, it's a survey) https://www.surveymk.com/s.aspx?sm=dVmRYNrf0LMIrm5nXlEciQ_3d_3d |
by Radoslawn | 17/05/2010 22:44:45![]() Hello Soliduz, At least we know the Mac is fine, just need to figure out why the wireless connection is bombing. Anything in-between the Mac and the wireless router ? Any electronics including: - walkie talkies - cordless telephones running at 2.4GHz or higher - baby monitors - cell phones - microwave ovens (have to be on) - boxes of paper** - radio transmitters/scanners **The three worst materials that a Wi-Fi signal will not pass through: Concrete, Bullet Proof Glass and Paper Reams (that paper box I talked about) No matter how simple the ??? seem, we were all nbs at one time. Grab your free Apple mount here !!! (okay I lied, it's a survey) https://www.surveymk.com/s.aspx?sm=dVmRYNrf0LMIrm5nXlEciQ_3d_3d |
by Radoslawn | 18/05/2010 15:09:20![]() Hello Soliduz, Either the settings or a lose wire, which has been known to happen from time to time. Since I can't see your settings let me know what you find out. No matter how simple the ??? seem, we were all nbs at one time. Grab your free Apple mount here !!! (okay I lied, it's a survey) https://www.surveymk.com/s.aspx?sm=dVmRYNrf0LMIrm5nXlEciQ_3d_3d |


Recent Blizzard Announcements